How To Install A Farmhouse Sink

Getting the Right Sink

If you do a lot of prep work in your kitchen or if you have kids that like to help out, then you should consider getting a farmhouse sink. These sinks are deep enough to give adequate washing space, but have a narrow design.

The narrow design allows you to fit additional cabinets above the sink, which makes a lot of sense in a small kitchen.

Most farmhouse sinks are either made of metal or composite materials. Stainless steel sinks are very durable and will not scratch easily. Composite sinks are great, however, because they are made up of a combination of different materials. This allows the sink to be very durable, but also lightweight and easy to install.

Many composite sinks have a scratch resistant coating so that they will look like new for a very long time. However, if scratches do occur, it’s easy to buff them out with a little bit of a kitchen-grade cream.

If you have a glass-enclosed cabinet above your sink, you may want to get a shallow farmhouse sink because it will serve two purposes. It will save space and give you room to wash dishes or scrub vegetables.

Measuring and Determining the Size

Measuring is the first step towards installing a farmhouse sink. It will ensure that the sink will fit in the designated area.

The measurement process is pretty simple. You would first need to measure the space you want to fit the sink, and the height. This will already give you the rough outline…

Measure the bottom dimension or the width of the area where you would mount the sink.

Measure the maximum height the cabinet or area above the sink would be.

You would take the measurements, and then use a calculator to determine the total volume of the area.

This will provide you with the rough outline of the sink, which you could purchase based on the given dimensions.

Farmhouse Sink Materials Explained

Kitchen farmhouse sinks are versatile and functional, as they are great for both comfort and functionality. The farmhouse sink has become the most popular size for sink purchases among homeowners who do most of the remodeling work in their homes themselves.

Farmhouse sinks are available in a number of sizes, typically from single-basin sizes of 12 and 15 inches to multiple-sink sizes ranging from 22 to 33 inches, depending on the width of the sink required. The width of the sink is often measured from the outside of the left bowl to the outside of the right bowl.

The wall-mounted sink measures from 12 to 30 inches, while undermount sink sizes measure from 15 to 33 inches. Sink widths are measured in increments of 2 1/2 inches.

The farmhouse sink also features an unorthodox design that is both nostalgic and practical. The sink is like many of the old-fashioned water taps where cool water is delivered above the warm water. The tank is also placed behind the sink to hide it away.

Farmhouse sink cabinet sizes are also available in many different sizes, from first-basin to third-basin. Single-basin farmhouse sinks measure 16 to 26 inches square, while double basins range from 20 to 35 inches.

Tools and Materials Needed For Installation

Tools Needed:

To install a Farmhouse sink, you will need a caulking gun and a few other tools. You will need:

Materials Needed:

This installation is for a 30" x 20" sink.

Preparing the Area

There are many things to consider before installing a farmhouse sink in your kitchen. Always repair and patch rusty sinks before starting your job.

Shut off the water supply, and then flush the drain with hot water. Then wipe the sink out with a clean cloth in a back and forth motion.

Next, repair the leaky sink flange by either tightening it or replacing it.

Take the sink out of the old countertop and place it on a clean work area. Carefully, remove the old countertop and dispose it in an appropriate area.

With sandpaper, clean the sink and the underside of the new countertop.

Building a Support Frame

The most important part of installing a farmhouse sink is making sure that it has a sturdy and strong support to keep it in place. At first, you think that putting it directly on the countertop is the way to go. Although like in the diagram given, if your sink is not heavy enough and you suddenly pull the faucet, then this is not a good option for you.

For a stationary farmhouse sink, you need frame that will be in the wall. It should be sturdy, and can be made from an L-shaped veneer or a 4×4 post. Use multiple bolts to secure it to the wall and the post. It should be placed at the center of the sink.

However, you might want a farmhouse sink that is mobile. You can do this by adding wheels and an axle with an eyehole.

This way, you can enjoy the convenience of moving the sink from room to room if need be.

This is the best way to go if you don’t have a permanent place for the farmhouse sink.

Placement of the Sink

Use level.

The studs should be used to locate the positioning of the vessel sink.

Measurement of the components will be done accurately by using the measuring tape.

There will be no issues when it comes to the installation because all the steps will be performed appropriately.

The faucet is properly installed near the top on one side while the drain is installed using the tee fitting on the cabinet floor.

Shims When the vessel sink is not perfectly aligned, it is going to create a distance between the vessel from the wall.

This is the time when you can use the shims to fix the space too.

They will come in handy to fill in the gap too.

Drill The drill bits help in making the hole for the faucet.

But before starting, make sure that you will use the proper size bits to fit the faucet.

The holes should be made in the vessel.

Vessel Sink and Plumbing

When it comes to picking them up, the sink has to be placed first on the countertop area.

There will be another set of holes that will be drilled in the sink.

The drill is used to mark the area of the faucet holes.

The connections of the water lines and drain lines in the vessel will be used to connect them.

Installing Countertops and Cabinets, Faucets, and Drainboard

Cabinets can be installed with screws and a drill. Jobs that require more specialized equipment, such as plumbing fixtures and certain cabinetry, will typically need to be installed by a licensed plumber.

A farmhouse sink is a type of sink with a bowl shape. The drain area on a farmhouse sink is usually large, which makes it an excellent choice for washing large pots, pans, and dishes. This type of a sink is practical, and is also very versatile in its appearance. A farmhouse sink can be used in kitchens, bathrooms, laundry rooms, and by homeowners who only have a single sink.

Farmhouse sinks are also known as double basin sinks, which means the sink has two cupped compartments. Farmhouse sinks are often permanently mounted, which means they cannot be removed. Many bathroom and lavatory walls aren’t designed to support a farmhouse sink, which means you must remove the sink to obtain the correct measurements needed for the wall that will support it. If you are planning on removing the sink, you can purchase temporary brackets to use until the wall is ready.

Once you’ve completed the measurements, create a diagram of the area where you will be installing the sink. This diagram will need to help you determine the measurements for each piece of wood that you will need for the frame, which will support the sink.

The Final Touches

Now that you’ve got the hole dug and a new sink, you want to put that farmhouse sink to good use. First things, first, make sure you have a faucet of some kind. Tell the people at the home improvement store you want a swivel faucet with a long neck.

Swivel faucets will allow you easy access to your sink. They’ll also give a simple look to your sink.

Remember when you laid out that piece of wood for the faucet? The process is even easier with the faucet. Just place the faucet base in the center of the hole and press down until snug.

Then, drill a hole where the faucet hole is, and secure it with some sort of screw driver.

Flip the sink and rest it on the rim of the hole. Grab that piece of wood you stained and place it under the sink.

Then, push down and push back, just like you did when you put together the piece of wood.

Conclusion

Those who've gotten a fixer-upper home know how quickly it can become a massive project. After you've sanded down a room's walls, installed tile floors, and both repainted it and changed the light fixtures, sometimes you look around at all that's left to do and just feel drained.

So often, home projects seem like all-or-nothing propositions. You feel like there are two options: do the project as it was originally built, or tear out all of the original materials and do the whole thing yourself. But this is rarely the case.

Any project can be broken down into smaller, manageable tasks, even if they don't seem like it at the time. This is why calling a plumber or painter to do your home project, even if you're planning on changing the design of some room or space, can help keep your project manageable.

One of the most common renovations that homeowners pursue is changing or upgrading their kitchen sink. Whether it's because your old one is grungy and tired or because your better half was never a fan of the color, you've come to the right place.

The process of changing your sink out is actually quite simple, as shown in this simple Guide. This project is a great beginner-level project because it only requires basic household tools and not a whole lot of know-how.